Filter
Top Products
31
Getting Started
Getting Started
5 Press CURSOR >/. to move the cursor (I) to REAR. Then, press
CURSOR ?// to increase or decrease the volume of the rear
speakers so you have an equal volume balance with the other
speakers at your listening position.
If you selected 3CH LOGIC in step 2, skip this step.
The surround speakers’ volume balance is always even.
This volume adjustment affects only the PROLOGIC sound field.
6 Press EXECUTE.
After “SET UP is done” screen is appears, a channel appears on the
TV screen.
Tips
• To adjust the relative volume balance between the front left and right speakers, use
BALANCE L/R on the unit.
• If you change the speaker configuration, reset the modes. See “Reconfiguring the
PROLOGIC and THEATER sound fields” on page 82.
• If you need to further increase the volume of the rear speakers from the maximum
level (+10 dB), see “Increasing the maximum rear speaker level” on page 83.
CENTER MODE
SET UP SOUND SET
TEST TONE
CENTER
REAR
+
+
8
10
dB
dB
END
SELECT
:
:
EXECUTE
SET
: