7
Getting Started
Getting Started
3
Connect the rear speakers to the SURROUND
SPEAKERS REAR L/R connectors.
Repeat step 1 above for the surround speakers.
If you don’t have rear speakers, skip this step.
Note
• Be sure to connect both left and right speakers. If you connect only
one speaker, the rear speaker won’t reproduce the sound.
Placing the speakers
For optimum surround sound effect, place your speakers as shown below.
Tips
• Position the center speaker so the face of the speaker is aligned evenly with, or slightly behind the faces of
the front left and right speakers.
• Mount the surround (rear) left and right speakers on the walls so they face each other.
• Position the front left and right speakers and center speaker as close to the same height as possible.
Connecting an active woofer
For further sound improvement, connect an active woofer to MIX OUT with an audio cable
(not supplied). The active woofer will increase bass response. The position of the active
woofer does not affect the sound quality very much.
Listening through the headphones
Connect the headphones to PHONES. No sound will be reproduced from the speakers.
CENTER
R-REAR-L
SURROUND SPEAKERS
(+)
(–)
45º
Front speaker
60-90 cm
Rear speaker
OUT
MIX INPUT
This unit Active woofer
Audio cable (not supplied)
PHONES