Sony SLV-AV100U Microcassette Recorder User Manual


 
47
Basic VCR / Radio Operations
Basic VCR / Radio Operations
Playing a video tape
MASTER VOLUME
Tips
The unit turns on if you
insert a tape while the
power is off.
The counter resets to
“0H00M00S” whenever a
tape is inserted.
Note
The unit’s sound won’t be
reproduced through the TV
unless the speaker
connectors or TAPE/MD
REC OUT jacks are
connected to the TV.
Normally, the speakers
connected to the unit
reproduce the sound.
Before you start...
Turn MASTER VOLUME to the leftmost position (0) to avoid
damaging your speakers.
1 Press VHS TUNER.
• If the TV doesn’t turn on, turn it on
manually.
• If connected with only the antenna
cable, set the TV to the video channel.
2 Insert a video tape.
The unit’s VCR starts playing
automatically if you insert a tape with
its safety tab removed.
3 Press · PLAY.
When the tape reaches the end, it will
rewind automatically.
4 Press MASTER VOL +/– on the
remote commander to adjust the
volume.
Additional tasks
To
Stop play
Pause play
Resume play after pause
Search forward
Search backward
Fast-forward the tape
Rewind the tape
Eject the tape
Press
p STOP
P PAUSE
P PAUSE or · PLAY
During playback, press and hold ) FF.
To resume normal playback, release the button.
During playback, press and hold 0 REW.
To resume normal playback, release the button.
) FF during stop
0 REW during stop
6 EJECT
123
456
789
0
>
10
p STOP
· PLAY
P PAUSE
MASTER VOL
+/–
)FF
To skip playback
You can skip a portion of playback you don’t want to watch such as a
commercial and restart playback by pressing a single button.
Press SMART CUE during playback of s scene you want to skip. The
VCR starts searching.
Press SMART CUE again when you find the scene you want to watch.
The VCR stops searching, rewinds a few seconds, then resumes normal
playback.
continued
VHS TUNER
0REW
SMART CUE
6 EJECT