Filter
Top Products
Introducing the Unit
11
Introducing the Unit
KLV-32U100M
2-668-009-13(1)
G:\#Sagyo\SONY\09 TV\kaihan KLV-
32U100M\1219_KLV32U100M_rev\2668009131\2668009131 KLV-
32U100M_US\01US03WEL.fm
masterpage:3 columns Right
Installing the Unit
Preventing the Unit
from Toppling Over
Attaching the Support Belt
1 Screw the support belt (supplied) to the unit stand with a wood screw
(supplied).
2 Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
3 Adjust the length by pulling the support belt towards you while holding
the unit stand.
When Mounting on a Wall
See the Instruction Guide supplied with the wall-mount bracket on how to
mount the unit on the wall.
Be sure to take measures to prevent the unit from toppling over and
causing injury.
Depending on the material used for the stand you chose for this unit, the
supplied wood screw may not be suitable. Consult your dealer about the
type of screw you can use for this unit and your stand. You will need
screws that are 3 to 4 mm (
1
/8 to
3
/16 inches) in diameter.
01US02WAR-UC.book Page 11 Monday, December 19, 2005 1:58 PM