Filter
Top Products
Connecting the Unit
18
KLV-32U100M
2-668-009-13(1)
G:\#Sagyo\SONY\09 TV\kaihan KLV-
32U100M\1219_KLV32U100M_rev\2668009131\2668009131 KLV-
32U100M_US\01US04INS.fm
masterpage:3 columns Right
Satellite Receiver
This scenario shows a SAT Box connected through the video inputs. Satellite
signals are selected by the SAT Box through the video inputs.
To connect a satellite receiver
1 Connect the satellite antenna cable to the satellite receiver’s satellite
input jack.
2 Use an A/V and S VIDEO cables to connect the satellite receiver’s
AUDIO and S VIDEO output jacks to the unit’s AUDIO and S VIDEO
input jacks (VIDEO 1 or 2).
Notes on Using This Connection
If your satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.
z If you connect the Digital
Satellite Receiver with
component video cables,
see page 20.
VIDEO IN
1
VIDEO
AUDIO
L
R
(MONO)
S VIDEO
Rear of unit
A/V cable
Satellite Receiver
Satellite
antenna
cable
S VIDEO cable
S VIDEO
VIDEO
(yellow)
AUDIO-L
(white)
AUDIO-R
(red)
To Do This ... Do This ...
Watch the satellite receiver Press V1 or V2 on the remote control.
or
Press INPUT on the top panel repeatedly to select the satellite receiver input (Video
1 or 2).
Label video inputs to easily
identify equipment connected to
the unit
See the instructions for setting up Label Video Inputs on page 40.
01US02WAR-UC.book Page 18 Monday, December 19, 2005 1:58 PM