Filter
Top Products
– 14 –
Self-Diagnosis Display Mode
• This set uses the self-diagnosis system in which if an error oc-
curs in playback mode, the error is detected by the model con-
trol and power control blocks of the microprocessor and infor-
mation on the cause is stored as history in EEPROM.
By viewing this history in test mode, it helps you to analyze a
fault and determine its location.
1. Setting the test mode (see page 12).
2. In the display check mode, press the [DISPLAY] key activates
the self-diagnosis display mode where the LCD display as shown
below.
3. Then, each time the N > key is pressed, LCD display de-
scends by one as shown below. Also, the LCD display ascends
by one when the . key is pressed.
4. Quit the self-diagnosis display mode, and press the x key to
return to the test mode (display check mode).
5. The display changes a shown below each time the
[DISPLAY]
key is pressed.
However in the power mode (item number 700’s), only the
item is displayed.
6. Quit the manual mode, and press the
x key to return to the
test mode (display check mode).
Overall Adjustment Mode
Mode to adjust the servo automatically in all items.
Normally, automatic adjustment is executed in this mode at the
repair.
For further information, refer to “Section 5 Electrical Adjustments”
(see page 17).
• Address & Adjusted Value Display
Remote commander LCD display
• Jitter Value & Adjusted Value Display
Remote commander LCD display
• Block Error Value & Adjusted Value Display
Remote commander LCD display
• ADIP Error Value & Adjusted Value Display
Remote commander LCD display
• Item Title Display
Remote commander LCD display
item number
address
adjusted value
item number
jitter value
adjusted value
item number
block error value
adjusted value
item number
ADIP error value
adjusted value
item number
item title
adjusted value
011 C68S01
011 OFFJ01
011 063B01
011 059A01
011 LrefPw 01
Remote commander LCD display
000 1st0**
history code
error display code
000 1st0**
000 1st100
000 1st200
000 N 0**
000 N 100
000 N 200
000 N-10**
000 N-1100
000 N-1200
000 N-20**
000 N-2100
000 N-2200
000 R 0000
1
1