Filter
Top Products
– 15 –
• Description of Indication History
History code number Description
1st 0 The first error
1st 1 Displays “00”
1st 2 Displays “00”
N 0 The last error
N 1 Displays “00”
N 2 Displays “00”
N-1 0 One error before the last.
N-1 1 Displays “00”
N-1 2 Displays “00”
N-2 0 Two errors before the last.
N-2 1 Displays “00”
N-2 2 Displays “00”
R Total recording time (Displays “0000” in this set)
• Description of Error Indication Codes
Reset the error display code
After servicing, reset the error display code.
1. Setting the test mode (see page 12).
2. Press the [DISPLAY] key activates the self-diagnosis display mode.
3. To reset the error display code, press the X key (2 times) when the code is displayed (except “R 0000”).
(All the data on the 1st, N, N-1, and N-2 will be reset)
Problem Indication code Meaning of code Description
No error 00 No error Normal condition
01
Illegal access target address Attempt to access an abnormal address
was specified
Servo error 02 High temperture High temperture
03 Focus error Forcus could not be applied
04 Spindle error Abnormal lotation of disc
Power error 22 Low battery Momentary interruption detected