Filter
Top Products
Connecting a Power Source
9
Using Battery Power
PCG-N505VE comes with the PCGA-BP51 battery pack, and PCG-
N505VX comes with the PCGA-BP52 battery pack. You can use a battery
pack as a source of power. The battery pack that comes with your
computer is not fully charged at the time of purchase. Follow the steps
below to insert and charge the battery pack.
To insert the battery pack
1
Move the lock lever on the bottom of the computer to the
UNLOCK
position.
2
Align the grooves and tabs on the battery with the tabs and notches
on the back of the computer, and then slide the battery toward the
computer until it clicks into place.
3
Slide the lock lever into the
LOCK
position to secure the battery on the
computer.
✍
You can also purchase the high-capacity PCGA-BP52 battery pack as a separate option.
See “Using Power Saving Modes” on page 32 for power management information.
Lock lever
Grooves
Tabs