Filter
Top Products
Hardware Guide
Connecting peripheral devices
80
nN
Disconnecting your computer from the port replicator
To disconnect your computer from the port replicator, proceed as follows:
1 Stop the connected peripherals.
2 Close the cover and pull the levers on each side of the port replicator to disconnect the computer from
the port replicator.
3 Lift the computer away from the port replicator.
4 Close the port replicator connector cover on the bottom of your computer.
✍ It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open,
dust may get inside and damage the computer.
To disconnect your port replicator completely from the mains voltage, unplug the AC adapter.