Filter
Top Products
Reader™ User Guide
Print
Search
Getting started
Basic Operations
Adding/Getting Content
Browsing Content Lists
Reading
Organizing
Other Applications
Settings
Other Information
Contents list
Top page > Getting started > Turning the Power On/Off > Turning the Power On/Off
Turning the Power On/Off
(Power) button
Charge/Busy indicator
Turning on the power
1. Press the (Power) button.
If the battery is completely depleted, power will not be supplied to the
(Power) button, and
you may not be able to turn on the Reader. In this case, the Charge/Busy indicator may blink
red 3 times. Connect the Reader to your computer via the supplied USB cable; the Reader
will automatically turn on approximately 5 minutes later. Wait until the Reader turns on before
trying to operate it.
Shutting down/turning off the power completely
1. Press and hold the (Power) button for about 3 seconds.
2. Tap [Yes] to turn off the Reader.
Completely turning off the Reader can preserve battery power longer than sleep mode when
you are not using the Reader for a prolonged period of time.
The same operation can be done via [Settings].
1. Press the (Home) button tap [Settings] [Device Shutdown]
[Yes].
Sleep mode
To save battery life and prevent unintentional operation of the touchscreen, set the Reader to
sleep mode by pressing the
(Power) button. The standby screen appears. You can
personalize the standby screen. See Details.
To wake the Reader, press the (Power) button again.
Automatic power-saving modes
The Reader will enter sleep mode after 10 minutes of inactivity. After 3 days in sleep mode, the
Reader will shut down/power off automatically. The automatic power-saving modes cannot be
turned off.
Go to page top
Copyright 2011 Sony Corporation
32