Filter
Top Products
19
Getting Started
Getting Started
OUT
IN
VHF/UHF
OUT
IN
VHF/UHF
Hookup 3
Antenna hookup
Make the following connections if you’re using an antenna (if you don’t
have cable TV).
AUse this hookup if you’re using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and
higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
BUse this hookup if you’re using a VHF-only antenna
(you get channels 2–13 only)
or
or
Rear of TV
VHF/UHF
VHF
UHF
VHF
UHF
Match the type of
connector on your
TV: A, B, or C.
B For connector types
B and C, no UHF
connection is
required.
A
C
or
or
UHF
Match the type of
connector on your
TV: A, B, or C.
A
Rear of TV
VHF/UHF
VHF
B
C
VHF
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an
external antenna connector (not supplied) so you can connect the cable to
the VHF/UHF IN connector. If you have separate cables for VHF and
UHF antennas, you should use a U/V band mixer (not supplied). For
details, see page 92.
VCR
VCR
(not supplied)
(not supplied)