Filter
Top Products
28 Location and Function of Controls
Location and Function of Controls
Front Panel
a System indicator
Lights in red, orange, or green to show the system
operation status.
b Status indicator
Lights in red, orange, or green to show the status of access
to the memory stick slot or of the internal system.
c Memory Stick slot
Insert a Memory Stick with the label side up.
For details, refer to the Installation Manual of the UCP-
8060 or the User’s Guide of the Operation Software used.
d Jog L, R buttons
The left button is the jog L button, and the right one the jog
R button. Press to change the layer of the menu.
For details, refer to the User’s Guide of the Operation
Software used.
e Jog roller
Turn the roller to select an item or change a value. Press the
roller to execute the selection.
For details, refer to the User’s Guide of the Operation
Software used.
f Function buttons
These buttons are called the function 1, 2, … 5 button from
the top, and light in red, orange, or green according to the
operation status. A function of a button depends on the
operation software used.
For details, refer to the User’s Guide of the Operation
Software used.
g Select L, R buttons
The left button is the select L button, and the right one the
select R button. Press these buttons to perform the function
displayed at the corresponding position on the task bar
(page 30). The screen display will change accordingly.
For details, refer to the User’s Guide of the Operation
Software used.
h Display window
Shows a menu or data. The window functions as a touch
panel, and you can select a function by touching an on-
screen object representing it. The items displayed depend
on the operation software used.
For details, refer to the User’s Guide of the Operation
Software used.
SYSTEM
UCP-8060
1System indicator
4Jog L, R buttons
5Jog roller
6Function buttons
7Select L, R buttons
8Display window
9Control knobs
3Memory Stick slot
2Status indicator