Filter
Top Products
55
VGF-CP1 Series 3-300-630-31(1)
3
Select [Search] by pressing
on the remote control, and press (ENTER).
A list of available access points is displayed.
4
Select an access point by pressing
on the remote control, and press
to
proceed to the next step.
The confirmation screen for SSID appears.
Hint
If several access points are displayed, select SSID of the access point in use.
5
Press
on the remote control to proceed to the next step.
The selection screen for the security type appears.
6
Select the security type by pressing
on the remote control, and press
to
proceed to the next step.
Select the security type confirmed in step 1.
If selecting other than [None], the screen to enter the WEP key or WPA key appears.
Hint
When selecting [None], proceed to step 12.
7
Press (ENTER) on the remote control to display the software keyboard,
enter the WEP key or WPA key, and press (ENTER).
Enter the password confirmed in step 1.