Filter
Top Products
56
VGF-CP1 Series 3-300-630-31(1)
8
Press
on the remote control to proceed to the next step.
The selection screen for address settings appears.
9
Select [Easy] by pressing
on the remote control, and press
to proceed to
the next step.
The setting screen for the connection name appears.
Hint
Select [Custom] to manually set information, such as the IP address.
10
If it is unnecessary to change the connection name, press
on the remote
control to proceed to the next step.
The confirmation screen for settings appears.
Hint
Normally it is unnecessary to change the connection name.
11
Confirm the setting, and press
on the remote control to proceed to the next
step.
12
Select [Yes] by pressing
on the remote control, and press (ENTER).
Connection to the access point is confirmed. When connected properly, “Network connection
completed” is displayed.