Filter
Top Products
24
Connecting the Projector
This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video output
connector
A Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
B Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output connector
A Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
B Signal Cable (not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono plug
• Set the aspect ratio using “Aspect” on the
Screen menu according to the input signal.
• When you connect the projector to a video
GBR output connector, select “Video GBR”
or when you connect the projector to a
component output connector, select
“Component” with the “Input-A Signal Sel.”
setting on the Setup menu.
Connecting a VCR
2
1
VCR
Rear
to video
output
to VIDEO
connector
to S
video
output
to audio
output
(L/R)
to
SVIDEO
connector
to AUDIO
connector
Notes
2
1
Rear
VCR
to INPUT A
connector
to AUDIO
connector
to audio
output
(L/R)
to video
GBR/
component
output