Filter
Top Products
37
Pausing the Image
Convenient Functions
ratio is displayed on the screen for a few
seconds.
By pressing the + key repeatedly, the
image size (ratio of enlargement: max. 4
times) increases.
Use the arrow key (v/V/b/B) to scroll
the enlarged image.
To return the image to its original size
Press the D ZOOM – key.
Just pressing the RESET key returns the
image back to its original size immediately.
Press the FREEZE key. “Freeze” appears
when the key is pressed. This function will
be active only when a signal from a
computer is input or an input signal of
“Network” or “USB” is selected. (VPL-
DX15 only)
To restore the original screen, press the
FREEZE key again.
Pausing the Image
There are two ways to pause the image. The
Lens shutter blocks the image by closing the
shutter outside the lens. The picture muting
shuts off the video signal.
Projection is interrupted by closing the lens
shutter with the lens shutter lever on the top
of the unit.
While the lens shutter is closed, an all-black
signal is output inside the projector.
The projector goes to standby mode
approximately two hours after you close the
lens shutter.
To Freeze the Image
Projected (Freeze)
Lens Shutter (Recommended
for Use on the Floor)
Lens shutter
lever