Filter
Top Products
32
Correcting the Trapezoidal Distortion Automatically (Auto V Keystone Correction)
The menu automatically goes off in
approximately 5 seconds after operation.
1 Press the MENU key.
The menu appears.
2 Press the v/V key to select the
Installation setting menu then press
the B or ENTER key.
3 Select “V Keystone” with the v/V key
from the Installation setting menu then
press the ENTER key.
4 Select “Auto” for automatic
correction or “Manual” to correct it
manually. Then, press the ENTER
key.
5 If you selected “Manual”, use the v/
V/b/B keys.
When the lower side is longer than
the upper side ( )
Adjust the volume to decrease it.
When the upper side is longer
than the lower side ( )
Adjust the volume to increase it.
6 Press the ENTER key.
• The auto V Keystone adjustment may not
correct the trapezoidal distortion perfectly,
depending on the room temperature or the
screen angle.
• Since the V keystone adjustment is an
electronic correction, sometimes the image
will be deteriorated.
To Change from the Menu
LAMP/COVER
INPUT
MENU
PUSH
ENTER
1
2~6
INPUT
MENU
NETWORK USB
RESET
AUTO FOCUS
D ZOOM
LENS
ENTER
VOLUME
KEYSTONE
/TILT
FREEZE
PIC MUTING
AUDIO MUTING
APA
1
2~6
Notes
Lamp Mode Standard
Direct Power ON Off
Auto