Filter
Top Products
27
Projecting
Projecting the Picture
When the selected input is a computer
signal, APA (Auto Pixel Alignment)
functions automatically to adjust the
image from the connected equipment for
clear display.
For details, see “Adjusting the Image
Quality (Smart APA)” on page 39.
When Network or USB is selected
(VPL-DX15 only)
When Network is selected, the
confirmation display to show
disconnection with USB memory
appears.
When USB is selected, the confirmation
display to show disconnection with the
network equipment appears.
If the network or USB memory is not
connected, or if they are to be turned off,
press the ENTER key.
If “Auto Input Search” is set to “On,” the
projector searches for the signals from the
connected equipment and displays the
input signal where the input signals are
found. In VPL-DX15, if there is no input
signal, “Network” is selected.
For details, see “Auto Input Search” on
page 52.
8 Switch the equipment connected to
output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
, etc.), or by
changing your computer’s settings.
The key used for switching the computer to
output to the projector varies depending on
the type of computer.
Video equipment
connected to the VIDEO
input connector
Video
Video equipment
connected to the
S VIDEO input
connector
S-Video
Computer connected to a
LAN to use the network
function
Network
USB memory connected
to the USB connector
USB
Note
To input from Press INPUT
to display
Note
or
and