39
Adjusting the Image Quality (Smart APA)
Convenient Functions
Adjusting the Image
Quality (Smart APA)
APA (Auto Pixel Alignment) automatically
adjusts the picture to be clear when a
computer signal is input. “Phase”, “Pitch”,
and “Shift” on the Screen menu are
automatically adjusted. When “Smart APA”
is set to “On”, this function works whenever
a signal is input.
1 Press the MENU key.
The menu appears.
2 Press the v/V key to select the
Function menu then press the B or
ENTER key.
3 Select “Smart APA” with the v/V key
from the Function menu then press the
B or ENTER key.
4 Select “On” or “Off” with the v/V
key.
On: The APA function automatically
starts when a computer signal is
input so that the image will be
clear. While it is “On”, the APA
key on the Remote Commander
can also be used to the image.
Off: Adjustment starts only when the
APA key on the Remote
Commander is pressed.
• Smart APA is applied only when a computer
signal is input.
• Press the APA key when the full image is
displayed on the screen. If the projected
image includes a black portion around it, the
APA will not work properly and some parts
of the image may not be displayed on the
screen.
• You can cancel the adjustment by pressing
the APA key again while “Adjusting”
appears on the screen.
• The picture may not be adjusted properly
depending on the type of input signal.
• Adjust the “Phase,” “Pitch,” and “Shift”
items in the Screen menu when you adjust
the picture manually.
LAMP/COVER
INPUT
MENU
PUSH
ENTER
1
2~4
INPUT
MENU
NETWORK USB
RESET
AUTO FOCUS
D ZOOM
LENS
ENTER
VOLUME
KEYSTONE
/TILT
FREEZE
PIC MUTING
AUDIO MUTING
APA
1
2~4
Notes