Filter
Top Products
Section 3: Using the PCS Connection Card
102 3F: Troubleshooting Tips (Notebook PC)
the PCS Connection Card by observing which entries are affected when
you eject and reinsert the card.
Replacing the Driver
1.
If the installation CD is not already in your CD-ROM drive, insert it.
If the CD start-up menu appears, use the
exit
option in the lower left
corner of the screen to exit the menu.
2.
Under
Network adapters
, click the PCS Connection Card entry.
3.
Click the
Properties
button.
4.
Click the
Driver
tab.
5.
Click the
Update Driver…
button to launch the Update Device
Driver Wizard.
6.
Click
Next
.
7.
Select
Display a list of all the drivers in a specific location, so
you can select the one you want
and click
Next
.
8.
Click the
Have Disk…
button to open the Install From Disk window.
9.
Enter
d:\Drivers\Win98
where
d
is the drive letter for your CD-ROM
drive. Click
OK
.
10.
Click
OK
.
11.
Click
Next
.
12.
Click
Finish
.
13.
Click
No
when prompted to restart your PC.
14.
In the Control Panel Device Manager window, select the
PCS Connection Card listing under
Modem
.
15.
Repeat steps 3 to 12.
16.
Restart your PC.
The correct driver should then be installed.
Windows 2000
To verify that the correct driver is installed:
ᮣ
Locate the existing driver
ᮣ
Update the driver
Locating the Driver
1.
Close all Windows programs and open the Control Panel by selecting
Start > Settings > Control Panel
.
2.
If the card is not already inserted into your PC Card slot, insert it.