Filter
Top Products
Section 3: Using the PCS Connection Card
3D: Menu Options 85
System Select
This field allows you to set roaming parameters for
your PCS Connection Card.
The options in this field are:
ᮣ
Home Only
prevents the card from roaming
off the Sprint Nationwide PCS Network
ᮣ
Home Preferred
allows the card to roam on
networks of “preferred” service providers
Auto-Launch
If this feature is enabled, the PCS Connection
Manager Software automatically launches when
you insert the card into a PC Card slot. When
disabled, you must launch the software from the
desktop shortcut or from the Start menu.
Use the check box to enable and disable the feature.
(The feature is enabled when checked.)
Update System Clock with CDMA
time during start-up
All PCs have an internal clock called the system
clock. Depending on your configuration, the time
according to this clock is usually displayed:
ᮣ
(Notebook/Handheld PCs) in the status area,
in the lower right corner of your screen
ᮣ
(Pocket PCs) On the Today page, in the top
right corner of your screen
Generally you would use the Windows Control Panel
(notebook PCs) or the Settings screen (Handheld/
Pocket PCs) to change the time on the system clock.
This field gives you the option of setting the time of
your system clock automatically from the CDMA
network each time you connect. This might be
useful to you if you frequently change time zones.
Use the check box to enable and disable this feature.
(It is enabled when checked.)
Table 11: General Tab Options (Continued)
Field Description