Filter
Top Products
Super Systems Inc. Page 14 SDS Data Logger Manual #4565 Rev D
20. Set the Date and Time
21. Port Setup
22. Input Calibration
23. Cold Junction Trim
24. System Setup
Configuration Level – Level 2 Pass Code Required
25. Set Pass Codes
26. Set IP Address
Menu Pages 27, 28 and 29 are reserved for future use and do not exist at this time. To minimize the
possibility of unintended modifications to the instrument, certain menu pages will require the entry of a
pass code to access them. Pages 1 through 18 are Operator level screens that do not require any
security codes. Pages 20 through 24 are Supervisor screens requiring a Level 1 pass code (default = 1).
Pages 25 and 26 are Configuration screens requiring a Level 2 pass code (default = 2). At the bottom of
the menu screen is a status bar, which tells the current date and time. The status bar also displays the
internal temperature (IT) of the instrument. This internal temperature should never exceed 50.
Note About Menu Numbers
Each menu screen has a unique number that is displayed in the upper left-hand corner of the screen.
This number is shown for reference. If you know the menu number of the screen that you would like to
go to, the screen number can be typed and the enter key pushed to access that particular screen directly
from the Main Menu list or the Overview Display screen.