Filter
Top Products
5-8
Default SNMP Manager IP Address—Displays the address of
the default SNMP manager.
Default Gateway IP Address—Displays the default gateway IP
address to which the unit sends IP packets destined for a differ-
ent subnet.
Subnet Mask—Displays the IP subnet mask that corresponds to
the assigned IP address.
SLIP Enable—Indicates whether SLIP is enabled or disabled.
SLIP is not enabled until after the switch has been reset.
SLIP IP Address—Displays the SLIP IP address.
SLIP Subnet Mask—Displays the SLIP subnet mask that corre-
sponds to the assigned SLIP IP address.
SNMP Get Community Name—Displays the SNMP Get com-
munity name for read-only SNMP access.
SNMP Set Community Name—Displays the SNMP Set commu-
nity name for write SNMP access.
Spanning Tree Protocol—Indicates whether Spanning Tree
Protocol is on or off. The default setting is “on”.
Address Aging—Indicates whether address aging is on or off.
Port Mirroring—Indicates whether port mirroring is on or off.
Dynamic Host Configuration Protocol—Indicates whether
DHCP is on or off.
Error Logged—Displays the error number of the first unrecov-
erable error that occurred. Please note this number and contact
SMC if an error has been logged.
Boot Firmware Version—Displays the current version of the
boot firmware.
Software Load Version—Displays the current version of the
load software.
CONFIGURING AND MONITORING