Filter
Top Products
5-9
CONFIGURING AND MONITORING
IP Configuration Menu
The IP Configuration Menu is accessed from the Switch
Configuration Menu.
___________________________________________________
>>>> IP Configuration Menu <<<<
1. Automatic Selection of IP address (DHCP).. [ ON]
2. Switch IP Address........... ..... [ 170.129. 78. 28 ]
3. Default SNMP Manager IP Address... [ 170.129. 78.208 ]
4. Default Gateway IP Address........ [ 170.129. 78. 1 ]
5. Subnet Mask....................... [ 255.255.255. 0 ]
6. SLIP Enable....................... [ Disabled ]
7. SLIP IP Address................... [ 0. 0. 0. 0 ]
8. SLIP Subnet Mask.................. [ 255. 0. 0. 0 ]
<ESC> To Exit Menu
Enter Selection:
___________________________________________________
Figure 5-4. IP Configuration Menu
Menu Selections
Automatic Selection of IP address (DHCP)—Allows you to
turn the Dynamic Host Configuration Protocol (DHCP) on or
off. The factory default is ON. If there is a DHCP server on
your network and DHCP is on, the IP Address, Gateway IP
address and Subnet Mask (menu selections 2, 4 and 5) for the
TigerSwitch
™
16 are assigned automatically. If there is no DHCP
server or if DHCP is off, you will have to enter these addresses
manually. Note that when you reset or powerdown with DHCP
on, you may or may not receive the same address assignments.
Switch IP Address—Allows you to enter the IP address
assigned to the switch.
Default SNMP Manager IP Address—Allows you to enter the
IP address of the default SNMP manager.
Default Gateway IP Address—Allows you to enter the IP
address of the default gateway to which the switch sends IP