SMSC SMC6516FF Switch User Manual


 
CONFIGURING AND MONITORING
5-10
packets destined for a different subnet.
Subnet Mask—Allows you to enter the IP subnet mask that cor-
responds to the assigned IP address.
SLIP Enable—Allows you to enable or disable SLIP. After set-
ting this field to “enable”, the swtich must be reset to actually
enable SLIP.
SLIP IP Address—Allows you to enter the SLIP IP address.
Note: This address must be different from the Switch IP address.
The Host Address can be the same,.but the network number
must be different.
SLIP Subnet Mask—Allows you to enter the SLIP subnet mask
that corresponds to the assigned SLIP IP address.