Star Micronics LS-5 TT Printer User Manual


 
I
1.3 PRINTER FEATURES
The Star LS-5 Series Laser Printer is a highly compact, fast and high-
resolution model, equally well-suited to home or office use. Its small
footprintconsumes significantly less space than many ofother laserprinters,
making it admirably suited for use in places where space is at a premium.
Standar@output resolution is 300 x 300 dots per inch. This can be boosted
to 300 x 600 dots per inch, giving the printer a noticeable edge over the
competition in clearly and sharpness of output.
The printing process used is that of’laser beam scanning, described in the
previous section.
The printer’s engine israted for fivepagesperminutes morethan adequate
for home use. and fine for many commercial environments. Actual throughp-
ut, however, depends on several other factors as well, most important y the
complexity of documents that are transmitted to the printer for printing.
Paper feeding is from one of two sources, a slide-in cassette that fits
compactly into the deck at the base of the printer chassis. and a front-loading
tray. The cassette holds 250 sheets as standard and there isalso an additional
feeder unit and cassette available as an option that will increase cassette-
feeding capacity to 500 sheets. The front paper tray can hold 50 sheets. A
range of paper sizes (Letter, A4, Executive. B5, Legal), and envelope sizes
COM- 10,Monarch, DL and C5 are available. Printing materials include
plain paper, envelopes, labels and transparency films.
The printer iseasily setup and controlled by means of the control panel and
LCD display screen.
Connection to host computers is via any one of three ports parallel,
RS-232C serial or AppleTalk. Two computers connected to dif-ferentports
may freely sharethe printer. The AppleTalk interface isonlyavailablefor use
with the LS-5TT or the LS-5EX with its,optionalTrueImage Boardinstalled.
Internally the printer processes data using a fast, high-performance RISC
chip — the 16MHz INTEL 80960SA.
The LS-5EX comes with 1MB of RAM as standard, and the LS-5TT comes
with 2 MB of RAM as standard. This can be expanded to a maximum of 7
MB (LS-5EX) or 8 MB (LS-5TT). which isadvisable ifcomplex documents
are to be processed, or if heavy use of fonts and macros is envisaged.
6