Star Micronics LS-5 TT Printer User Manual


 
TEST/>
Pressing this button when the printer is in Normal Mode will operate in the
following sequence:
1. Pressing this button displays “HOLD FOR TEST” on the bottom line of
the LCD display screen. If the button is released while this message is
displayed, the printer returns to the previous state.
2. If the button is held down for two seconds, the screen will display
“STATUS SHEET” on the top line. If the button is released, the printer
will print a status
sheet (see “3.2.1 Printing Test Sheets”).
3. Ifthebutton ispressedfortwo more seconds(except in Hex Dump mode),
the screen will display “FONT LIST” on the top line. If the button is
released, the printer will print a font list.
4. Ifthe button ispressed fortwo more seconds (inthe TrueImage Emulation
mode), the screen will display “TEST PAGE” on the top line, and the
printer will print a test page.
When the printer is off-line and in the Program Mode, this button is called
PREVIOUS(>). During programming, pressing this button displays the
“previous” items under a category for the operator to select in the sequence.
RESET/V
This button has three functions when the printer is off-line.
. Pressing and holding this button when the printer is in the Normal Mode
the screen will display
“HOLD FOR RESET”. If this button is held for
more than two seconds, “REINIT IA LZED” message isdisplayed on the
screen and the printer isreinitialized to the initial settingsof the emulation
currently selected, This will also clear the input buffer, any page in
composition, and all composed pages queued up.
When theprinteris inthe Program Mode, thisbutton iscalled ENTER( V).
Pressing this button “enters” the current category and selects it. This is
indicated by a “@” symbol.
Turning the power on while holding down this button causes the printer
to enter the display language selection mode. (See “4.9 Selecting Display
Language”.)
40