Filter
Top Products
7.3.2 Font Cartridge Problems
The font cartridge is plugged into the printer. It should not be inserted or
withdrawn while the DATA LED is continuously lit. If’someone does this,
the screen will indicate “CARTRIDGE ERROR”. The printer must be
reinitialized by turning off the power and then on again.
If a font cartridge is removed while the DATA LED is blinking, the screen
will display “REINSERT CART”. in this case, the operator must insert the
font cartridge or press (-).
If (~) is pressed, the printer will
select the closest font.
Message
Meaning
Action
CARTRIDGEERROR Fontcartridgeisremoved Turn the power off then on
while DATA LED is on
again to initialize the printer
REINSERT CART. Fontcartridgeisremoved insert the cartridge or press
while DATA LED is
-
blinking
7.3.3 Optional Hardware
The following messages will be displayed if necessary optional hardwares
(e.g. RAM expansion board) have been removed.
Message
Meaning
INSUFFICIENTRAM full page mode is se-
lected; no expansion
RAM installed
INSUFFICIENTRAM full page mode and REP
is selected; 1MB expan-
sion RAM installed
NO EMUL. BOARD emulation of the board is
selected; no emulation
board installed
Action
repower-up with expansion
RAM board, or press
-
repower-up with 2MB (or
more)expansionRAMboard,
or press (-)
repower-up with the emula-
tionboard,orpress (-)
81