Filter
Top Products
Instruction Manual
9
Hardware Guide
Front Panel Functions
KVM Control and Status:
(This section is eective only when a KVM switch module is connected.)
1. Computer Selection Pad - Press one of these pushbuttons to select a computer. For
16 port models, 1-8 represent the lower 8 ports, while A-H indicates the higher 8
ports. Port 1 and A share the same pushbutton; if port 1 is already selected, tap its
pushbutton to select port A. If port 1 is not selected, press and hold pushbutton 1
for two seconds to select port A.
2. Selected Computer Indicator - One of the indicators turns red when a corresponding
computer is selected by pushbuttons, hotkey or OSD menu.
3. Local Console in Operation - When a computer is accessed through the console, this
will illuminate green.
4. Remote Console in Operation - This will illuminate green when a computer is
accessed by another set of keyboard/mouse/monitor connected to the Remote
console when the KVM Switch Function Module is a 2-console KVM.
LCD Panel Control:
5. LCD Panel Menu - These buttons invoke the OSD menu for the LCD panel and acts as
menu selection/navigation
6. LCD Panel Adjustment - Lets you adjust settings for the LCD panel.
1
2
3 4
5
6
7 8
9
10