Instruction Manual
42
Using the Advanced Video Tuning feature
The Advanced Video Tuning menu allows you to adjust the qualities of the video
in your VNC sessions, and can be accessed by clicking the Advanced button on the
Video Tuning VNC menu. While many users will probably allow the CABCONS1716I to
automatically congure the video properties, you can use this menu to exercise a great
deal of control over the settings if required.
The Presets section contains up to sixteen dierent settings, plus the factory setting.
If a number is highlighted, then that preset has been programmed with valid settings
and may be used. Please note that the Factory preset is always available and can be
restored by simply clicking on the appropriate button.
To save settings to a preset, click on the Save->Preset button in the Actions pane. The
preset buttons will highlight. Click the desired preset button to save the values. Note
that any previous settings assigned to that button will be lost. If you do not wish to
save the presets after clicking the Save->Preset button, click the Save->Preset button a
second time and the save function will be canceled.
The section of the screen marked Current Values indicates the various video
parameters that can be adjusted. For each parameter, there are a series of buttons:
[, <<, -, Auto, +, >, ].
• The ’[’ and ’]’ buttons set the parameter to its smallest or largest values, respectively.
• The ’<<’ and ’>>’ buttons decrease or increase the parameter by a large amount. In
the case of phase, this is 4 units. For all others, this is 10 units.
• The ’-’ and ’+’ buttons decrease or increase the parameter by one unit.
• The middle button sets the parameter to the middle value. The text of the middle
button also indicates which parameter is being controlled.
NOTE: In the case of phase, the middle button invokes the auto-phase algorithm.