Filter
Top Products
Instruction Manual
17
Network
The Network dialog is used to specify the SV1107IPEXT’s network envi-
ronment.
Access Ports
If a firewall is being used, the Administrator
can specify (in the firewall set up) the port
numbers that it will allow. When connecting
to the SV1107IPEXT, users must specify
the port number as part of the IP Address.
If an invalid port number (or no port num-
ber) is specified, the SV1107IPEXT will not
be found. (i.e 192.168.0.60 / 9000 for the
Windows client, 192.168.0.60/9002 for the
Java client.)
Please Note:
If there is no firewall (on an Intranet, for 1.
example), these numbers will not have
any effect.
The access ports cannot have the same 2.
value. A different value must be set for
each one.
Explanations of the fields are given in the table below:
Field Explanation
Program
This is the port number that must be specified when
connecting from the Administrator and Windows Client. Valid
entries are between 1024 -60,000
Java
This is the port number used for Java connections. Valid
entries are between 1 - 65535