Filter
Top Products
Instruction Manual
26
After the upload completes, click the 4. Apply icon at the left side of the
web page.
Enable the 5. Reset on Exit checkbox on the Customization page.
Re-click the 6. Apply icon at the left of the web page.
Click the 7. Logout icon at the upper right of the web page to exit and
reset the SV1107IPEXT.
Using the SV1107IPEXT
Start by accessing the unit through your local network, to verify the set-
tings are correct and operate as desired. Once the setup is confirmed on
your local network, the final step will be to connect through the Internet.
Required Equipment
A networked computer, either on your network or on the Internet, that
meets the following minimum requirements (you cannot use the computer
that is directly connected to the SV1107IPEXT):
Pentium® III 1 GHz processor or higher•
A screen resolution set to 1024 x 768.•
A browser supporting 128-bit SSL data encryption•
Recommended Internet connection speed: 128 kbps or higher•
For the browser-based Windows Client, you must have DirectX® 7.0 or •
higher installed.
For the browser-based Java Applet, you must have Sun’s Java Runtime •
Environment Version 6 Update 3 or higher
Connecting from your Local Network
Ensure the remote computer is connected to your network.1.
Ensure the SV1107IPEXT is connected to your local network.2.