Filter
Top Products
Instruction Manual
20
Filtering
To enable IP and/or MAC filtering, place a checkmark in the IP Filter
Enable and/or MAC Filter Enable checkbox. There is a maximum of 100
filters allowed for each option.
If the • include button is checked, all the addresses within the filter
range are allowed access to the SV1107IPEXT. Addresses not
specified within the filter will be denied access.
If the • exclude button is checked, all the addresses within the filter
range are denied access to the SV1107IPEXT. Addresses not
specified within the filter will be allowed access.
User Station Filtering – IP Addresses
To add an IP Address filter:
Click 1. Add. A dialog box similar to the one below appears:
Specify the filter address in the dialog box, then click 2. OK. A second
dialog box, similar to the one below, appears:
To filter a single IP address, key in the same address as the start IP 3.
Address. To filter a continuous range of addresses, key in the end
number of the range.
After filling in the address, click 4. OK.
Repeat these steps for any additional IP addresses you wish to filter.5.