Filter
Top Products
Preparing for Installation 1-15
1
• Front panel key (packed in a bag in the accessory box)
Follow the graphic instructions on the shipping container to remove the server
from the container. Remove the front panel key and the power cord from the
shipping container. These are needed to power on the system.
1.9 Using the User Naming Area
To display the name of the server, IP address, owner, or other important
information on the front of the machine:
1. Remove the top front bezel.
Refer to Chapter 13, “Preparing for Service,” in the Ultra Enterprise
6000/5000/4000 Systems Manual.
• Enterprise 6000/5000 systems: refer to Section 13.3.3, “Top Front Bezel.”
• Enterprise 4000 system: refer to Section 13.4.1, “Top Bezel.”
2. Snap out the narrow transparent window.
From the rear side of the bezel, gently squeeze the top and bottom edges
together as you simultaneously push the transparent window out through
the front of the bezel.
3. Choose the information that will appear on the label.
Common items include the name of the server, IP address, name and contact
information for the system administrator, and the group of users that the
machine services.
4. Use the colored paper provided with the system to make a label.
The available area for the paper label is 12 mm x 150 mm (0.5 in x 5.9 in).
Print or write the desired information in an area this size and cut the label to
fit the transparent window.
5. Place the paper label inside the window, and snap the window back in
place from the front side of the bezel.