SUPER MICRO Computer AS1011M-T2 Network Card User Manual


 
Chapter 1
Introduction
1-1 Overview
The AS1011M-T2 is a high-end single processor, mini 1U rackmount server com-
prised of two main subsystems: the SC811FT-260 chassis and the H8SMi-2 moth-
erboard. The H8SMi-2 supports a single AMD Opteron 1000 series processor in a
940-pin AM2 socket and up to 8 GB of ECC/non-ECC DDR2-800/667/533 SDRAM
memory. Please refer to our web site for information on operating systems that
have been certifi ed for use with the 1011M-T2 and for regular updates on supported
processors.
In addition to the motherboard and chassis, various hardware components may
have been included with the 1011M-T2, as listed below.
One (1) slim CD-ROM drive [CDM-TEAC-24(B)]
One (1) fl oppy drive (FPD-PNSC-W1.44MB)
Two (2) hot-swap SATA drive carriers [(CSE-PT10(B)]
Two (2) SATA cables (CBL-0061L)
One (1) SGPIO cable (CBL-0157L)
Two (2) 4-cm counter-rotating fans (FAN-0087)
One (1) 4-cm dummy fan (CSE-PT0100)
One (1) air shroud (MCP-310-00028-01)
One (1) SATA backplane (CSE-SAS-810TQ)
One (1) passive CPU heatsink for AM2 (SNK-P0026)
One (1) PCI-E x16 riser card (CSE-RR1U-E16)
Rackmount hardware with screws (CSE-PT8)
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails in a rack/telco rack
Chapter 1: Introduction
1-1