Filter
Top Products
27Installing and configuring the product
Verifying the configuration files
.
.
.
31 CONNWAIT
lan1 DOWN
lan2 DOWN
Note: The output lists 32 nodes. It reports on the two cluster nodes,
system01 and system02, plus non-existent nodes. For each correctly
configured system, the information shows a state of
OPEN, a status for each
link of
UP, and an address for each link. However, in the example above, the
output shows that for node system02, the private network may have failed,
or the information in /etc/llttab may be incorrect.
To obtain information about the ports open for LLT, type lltstat -p on
any system. In the following example, lltstat -p is typed on one system
in the cluster.
4 Log into system01.
# lltstat -p
Output resembles:
LLT port information:
Port Usage Cookie
0 gab 0x0
opens: 0 1 3 4 5 6 7 8 9 10 11 12 13...
connects: 0 1
Note: The two systems with node ID’s 0 and 1 are connected.
See “/etc/llthosts” on page 24.