Filter
Top Products
Monitor Assignment
Task
Press monitor symbol to activate pink noise test-tone.
Then select task for the monitor now playing the noise. Serial number and type will be indicated.
A monitor marked with a question mark indicates that an “unknown” monitor has
been detected. (This icon is darker in colour than the previously mentioned ‘monitor
not found’)
Scan System
Press the magnifying-glass to scan the entire system for connected units.
Save Settings - All settings except “preset settings” are saved to a back-up file.
Load Settings - Press and browse to select file to load. Follow the instructions.
Calibrate - Main Monitors
Pink Noise
Solo
Mute
Parameters and settings for the Main monitors are controlled in this screen
The screen is accessed via the Main Screen by holding the cursor above the desired monitor and selecting
the hammer icon.
Room position
Range: Neutral, Wall, Corner, Console, C. Wall or C. Corn
Select according to the actual position of the monitor.
X Curve
Range: Off, X-Curve 1 or X-Curve-2
Two modifications of X-222 curve are available.
See page 51.
39