Tascam US-1800 Computer Drive User Manual


 
6 TASCAM US-1800
Trademarks
TASCAM is a trademark of TEAC Corporation, registered
in the U.S. and other countries.
Microsoft, Windows, Windows Vista, Windows 7, and
Windows Media Player are either registered trademarks
or trademarks of Microsoft Corporation in the United
States and/or other countries.
Apple, Macintosh, Mac OS, Mac OS X and iTunes are
trademarks of Apple Inc., registered in the U.S. and
other countries.
Pentium and Intel are trademarks of Intel Corporation
in the U.S. and/or other countries.
AMD Athlon is a trademark of Advanced Micro Devices,
Inc.
Cubase is a registered trademark of Steinberg Media
Technologies GmbH. ASIO is a trademark of Steinberg
Media Technologies GmbH.
Other company names and product names in this
document are the trademarks or registered trademarks
of their respective owners.
Precautions and notes for placement
and use
The operating temperature should be between 5°C and
35°C (41°F and 95°F).
Do not install in the following types of places. Doing
so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations or that are
otherwise unstable
Near windows or other places exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
Make sure that the unit is mounted in a level position
for correct operation.
Do not place any object on the unit for heat dissipation.
Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
Beware of condensation
If the unit is moved from a cold to a warm place, or used
after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the
internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using.
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do
not wipe with chemical cleaning cloths, benzene, paint
thinner, ethyl alcohol or other chemical agents to clean
the unit as they could damage the surface.
1 − Introduction