83
-
507
-
013 Rev. D
11
NOTES:
*1: Minimum voltage is guaranteed to maximum 0.2% of the rated output voltage.
*2: Minimum current is guaranteed to maximum 0.4% of the rated output current.
*3: For cases where conformance to
various safety standards (UL, IEC etc.) is required, to be d
e-
scribed as 100
-
240Vac (50/60Hz).
*4: At 100/200V input voltage and maximum output power.
*5: From 85
132Vac or 170
265Vac, constant load.
*6: From No
-
load to Full
-
load, constant input voltage. M
easured at the sensing point in Remote
Sense.
*7: For load voltage change, equal to the unit voltage rating, constant input voltage.
*8: For 6V models the ripple is measured at 2
6V output voltage and full output current. For other
models, the ripple is me
asured at 10
100% output voltage and full output current.
*9: With rated, resistive load.
*10. For 6
300V models: Measured with JEITA RC
-
9131A (1:1) probe
For 600V model: Measured with (10:1) probe.
2.12 SUPPLEMENTAL CHARACTERISTICS
The supplemental
characteristics give typical but non
-
warranted performance characteristics. The
supplemental characteristics are useful in assessing applications for the power supply. Several kinds
of supplemental characteristics are listed below.
1.
Evaluation Data: Typica
l performance of the power supply.
2.
Reliability Data: Reliability Performance of the power supply.
3.
IEC1000 Data: Performance of the power supply under IEC1000 test conditions.
4.
EMI Data: Typical EMI (conducted and radiated) performance of the power supply.
T
he supplemental characteristics data is held in each TDK
-
Lambda Americas Inc. sales and service
facility. For fu
r
ther details please contact the TDK
-
Lambda Americas Inc. office nearest you.