Teac CD-W28PU Computer Drive User Manual


 
68
ENGLISH
4. Names and Functions
Eject button Press this button to open the top cover.
An electrical locking mechanism is used in
this drive so that an erroneous operation
does not open the top cover during write.
Make sure that the power is on and the drive
is not in operation before pressing the eject
button to open the top cover.
If the top cover cannot be opened even when
the eject button is pressed or if the top cover
needs to be opened when power is not sup-
plied from the AC adapter, use the emer-
gency eject lever at the bottom of the drive.
Check that nothing is placed on the top cover
when ejecting. When normal ejection is im-
possible, an error message may appear on
your computer.
When ejection is not performed normally,
open the top cover manually and close it se-
curely after removing anything that may be
on the cover.
XLine output jack Connect this jack to the line input signal of
your computer using a ø3.5mm stereo mini
plug when outputting the analog audio sig-
nal from this drive.
This can be used as an input signal for speak-
ers with a built-in amplifier.
YEmergency eject lever When ejecting the media with the power off,
insert a thin metal rod into the emergency
eject lever and slide it in the direction of the
arrow shown in the figure to open the top
cover.
T Use the eject button instead of the above
method except in an emergency.
T Perform this operation with the power off.
W a r n i n g
W a r n i n g