Filter
Top Products
75
ENGLISH
5. Setting up the CD-W28PU
5.4 Driver installation under Windows Me
An appropriate driver will be automatically set when the drive is initially
connected in Windows Me. You can make sure that the drive has been
recognized after connection by using Device Manager.
If you use any USB 2.0 host adapter with your system,
it is required to install the USB 2.0 host adapter and the
driver for it before connecting this drive
“TEAC CD-W28E” at “CD-ROM”
“USB Mass-Storage Device” at “Universal Serial Bus Controller”
“USB CD-ROM” at “Storage Device”
C a u t i o n