Filter
Top Products
Setup Information
34
Using HyperTerminal
NOTE: J35 must be in the A position.
To assign the IP Address and Network Mask using HyperTerminal, do the following:
1. Connect the IP-223 to your PC using a DB-9 serial cable.
2. From the Start menu on the computer, open the HyperTerminal Application, see Figure 84.
(Start|Programs|Accessories|Communications|HyperTerminal).
The HyperTerminal and Connection Description windows appear, see Figure 85.
3. In the Name field, enter com.
4. Click OK.
The Connect To window appears.
5. From the Connect Using drop down menu, select COM1.
6. Click OK.
The Com1 Properties window appears.
7. From the Bits per second drop down menu, select 19200.
FIGURE 84. HyperTerminal Navigation