Filter
Top Products
Setup Information
64
Available selections for this field are: Normal, FleetSync Series 80, FleetSync Series 80 - Scan List, FleetSync Series 90,
FleetSync Series 150, FleetSync Series 150 - Scan List, FleetSync Series 180, FleetSync Series 180 - Scan List, Kenwood 5710
and /5810, EF Johnson 5300.
Serial Port Params Drop Down Menu
The Serial Port Params (Parameters) drop down menu identifies the configuration of the serial port data speed and format.
Serial port parameters refer to bit rate, parity, data bits, and stop bits.
The serial port parameters in Tone or Console mode is, by default, 19200.N.8.1
Available selections for this field in Local mode are: 300,N,8,1; 300,N,8,2; 300,E,7,1; 1200,N,8,1; 1200,N,8,2; 1200,E,7,1;
2400,N,8,1; 2400,N,8,2; 2400,E,7,1; 4800,N,8,1; 4800,N,8,2; 4800,E,7,1; 9600,N,8,1; 9600,N,8,2; 9600,E,7,1; 19200,N,8,1;
19200.N.8.1; 19200,E,7,1. See Figure 100.
NOTE: If necessary, refer to the Radio Dispatch and Signaling Equipment downloads available on the Telex website
(www.telex.com) for this setting based on the radio to be installed.
FIGURE 100. Serial Port Drop Down Menu - Local Mode
FIGURE 101. Serial Port Params Drop Down Menu - Normal Mode