Filter
Top Products
69
Per Line Setup Window—Phone Mode Configuration
Per Line Setup Window—Phone Mode Configuration
The Per Line Setup window for Phone Mode configuration, see Figure 105, appears when Phone is selected from the Line
Type drop down menu on the Multicast Address Setup window. In Phone mode, the following options are available for per line
configuration.
Auto Answer Field
The Auto Answer field identifies the number of times the phone rings before the line goes offhook. This field is used to
remotely enable a IP-223 to PIB or TDI connection.
Auto Disconnect Time Field
The Auto Disconnect Time field identifies the amount of time, in seconds, before the IP-223 automatically places the PIB or
TDI adapter onhook or disconnects if the threshold entered in the LAM Level field described below is not reached.
TX Delay Field
The TX Delay field identifies the delay, in ms, of TX audio. When TX Ethernet packets arrive, the PTT relay is closed and TX
audio is delayed for the specified time. This provides the ability to overcome timing issues involving repeater attack time or
trunking (clear to talk) delays.
The range for this field is 0 to 2000ms.
FIGURE 105. Per Line Setup - Phone Mode (view 1)
Auto Answer Setup
Delay Setup