Filter
Top Products
2.5.4
Installing External VGA Monitor
The notebook is capable of driving both its internal LCD display and an
external VGA monitor (LCD only, simultaneous, or VGA only). The external
monitor connector pinouts and connector locations are shown in Figure 2-8.
To install an external monitor with the notebook, use the following steps:
1. Ensure that both the notebook and the external monitor are turned
off.
2. Locate the 15-pin female VGA port on the rear of the notebook.
3. Attach the appropriate end of the monitor cable to the VGA port on
your notebook. If the monitor cable connectors have retaining screws,
tighten them down.
4. If necessary, connect the monitor power cable to the monitor, and
plug the monitor power cable into an electrical outlet.
5. Power on the monitor, as well as any other peripheral devices
connected to the notebook; then power up the notebook.
1
2
3
4
5
6
7
8
9
10
11, 12
13
14
15
RED VIDEO
GREEN VIDEO
BLUE VIDEO
NOT USED
GROUND
RED RETURN
GREEN RETURN
BLUE RETURN
NOT USED
GROUND
NOT USED
HORIZONTAL SYNC
VERTICAL SYNC
NOT USED
OUTPUT
OUTPUT
OUTPUT
INPUT
INPUT
INPUT
OUTPUT
OUTPUT
PIN
SIGNAL NAME
DIRECTION
EXTERNAL VGA CONNECTOR PINOUTS
1
2
3
4
5
7
8
9
10
6
1112131415
Figure 2-8 External Monitor Port Pinouts
Installation
2-9