Filter
Top Products
Startup Error Messages
7-4
Disk drive A error o Drive A: is present but fails the
BIOS POST disk tests. Enter Setup
and check that the drive is defined
with the proper disk type.
Extended RAM Failed at
offset: nnnn
o Extended memory is not working or
configured properly at offset nnnn.
Contact your dealer or an
authorized service center.
Failing Bits: nnnn q The nnnn is a map of the bits at the
RAM address which failed the
memory test. Contact your dealer or
an authorized service center.
Fixed Disk 0 Failure
Fixed Disk Controller
Failure
q Hard disk drive is not working or
not configured properly. Run Setup
and see if the hard disk drive type
is correctly identified (try setting
this to [Auto]).
Incorrect Drive A type q The disk drive type is not correctly
identified in Setup. Run Setup and
set the correct disk drive type.
Invalid NVRAM media
type
q There is a problem with NVRAM
(CMOS) access. Contact your dealer
or an authorized service center.
Keyboard controller
error
q The keyboard controller failed the
test. Contact your dealer or an
authorized service center.