Filter
Top Products
Installing the Code Generation Tools
2-3
Setting Up the Code Generation Tools With Windows 95 and Windows NT
2.2 Installing the Code Generation Tools
This section helps you install the code generation tools on your hard-disk sys-
tem. The code generation tools package is shipped on CD-ROM. To install the
tools on a PC running Windows 95 or Windows NT, follow these steps:
1) Insert the
TMS470R1x Code Generation Tools
CD-ROM into your CD-
ROM drive.
2) Start Windows.
3) If you are running Windows 95, select Run from the Start menu.
If you are running Windows NT, select Run from the File menu.
4) In the dialog box, enter the following command (where d: is the name of
your CD-ROM drive):
d:\setup.exe
5) Click on OK.
6) Follow the on-screen instructions.
If you choose not to have the environment variables set up automatically, you
can set them up yourself in one of the following ways:
If you are running Windows 95, you can set up the environment variables
in your autoexec.bat file.
If you are running Windows NT, you can set up the environment variables
in the System applet of the Control Panel.
See Section 2.3,
Setting Up the Code Generation Environment,
on page 2-4,
for more information.