Filter
Top Products
1 SpeedTouch™ Installation
E-DOC-CTC-20030814-0001 v1.0
11
1.3 SpeedTouch™ Configuration Setup
Internet connectivity Some configuration may be required to prepare the SpeedTouch™ for Internet connec-
tivity.
Before setting up the SpeedTouch™ for Internet connectivity, make sure that the
SpeedTouch™ is prepared as described in “1.2 Setting Up the SpeedTouch™” on
page 9.
You can configure the SpeedTouch™:
• Over the traditional wired Ethernet network
• Over the SpeedTouch™ wireless Ethernet network
If you want to configure the SpeedTouch™ over the wireless interface, make sure
that your computer’s WLAN client is correctly associated with the SpeedTouch™
wireless network according to “4.1 First-time Wireless Client Association” on
page 43 before proceeding.
What you need from
your ISP
You might need a user account with an Internet Service Provider (ISP) for Internet
access. For this user account, your ISP will provide you with:
• A user name (logon ID).
• A password.
Other information may be required, depending on the ISP’s specific requirements and
Service profile selection.
SpeedTouch™
configuration options
The method for configuring the SpeedTouch™ via the Setup configuration files depends
on the Operating System (OS) of your computer system.
If your computer system runs:
• A Microsoft Windows Operating System:
The SpeedTouch™ Setup wizard, included on the SpeedTouch™ Setup CD-ROM,
will automatically guide you through the configuration of both the SpeedTouch™
and your PC for setting up the appropriate configuration.
Proceed with “1.3.1 Microsoft Windows SpeedTouch™ Configuration Setup” on
page 12.
In addition it is recommended to install Dr SpeedTouch™. See
“3 Dr SpeedTouch™” on page 37 for more information.
• Another Operating System (e.g. Apple Mac OS, UNIX, Linux, etc.):
The SpeedTouch™ Embedded Easy Setup wizard, accessible from the Speed-
Touch™ web pages, will automatically guide you through the configuration of the
SpeedTouch™.
Proceed with “1.3.2 Operating System Independent SpeedTouch™ Configuration
Setup” on page 19.