Filter
Top Products
1 SpeedTouch™ Installation
E-DOC-CTC-20030814-0001 v1.0
19
1.3.2 Operating System Independent SpeedTouch™
Configuration Setup
Supported Systems As the SpeedTouch™ is OS-independent, this configuration setup can be used by any
computer system.
Prerequisites Make sure that:
• The SpeedTouch™ device is correctly set up and turned on as described in
“1.2 Setting Up the SpeedTouch™” on page 9.
• The SpeedTouch™ device is in its default configuration state.
See “7.4 SpeedTouch™ Default Configuration” on page 88 for resetting your
device.
• If you want to configure the SpeedTouch™ over the wireless network, the
computer’s WLAN client is installed and correctly associated with the Speed-
Touch™ wireless network according to “4.1 First-time Wireless Client Associa-
tion” on page 43.
• The computer’s Operating System supports TCP/IP and it’s Ethernet interface is
configured for obtaining its IP configuration dynamically.
Note In case of problems with DHCP you can also configure the computer’s
Ethernet interface with a static Net10 private IP address, e.g. 10.0.0.1,
10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address as this is
the default IP address of the SpeedTouch™.
• Your web browser is able to run Java scripts.
SpeedTouch™
Easy Setup
SpeedTouch™ Easy Setup consists of two parts:
• Configuration of the SpeedTouch™
• Additional configuration (if needed)