Filter
Top Products
4 Wireless Connectivity
E-DOC-CTC-20030814-0001 v1.0
46
Registering wireless
clients
In case registration is enabled, you must register pending wireless network clients as
follows:
1 Make sure the wireless client is correctly associated to the SpeedTouch™ WLAN.
Depending on your WLAN client adapter a wireless icon may become green or a
message similar to the following may appear: “Successfully joined Wireless net-
work SpeedTouch012345".
Note Some WLAN clients do not automatically join a WLAN. If so, follow
the instructions for the WLAN client software to initiate the associa-
tion.
2 Push the red Registration button on the SpeedTouch™ back panel or click Register
on the SpeedTouch™ Wireless web page (see “ Wireless” on page 52 for more
information).
The SpeedTouch™ will now add the wireless client to the Access Control List and
save the current configuration.
Note You can only register one wireless client at a time. So you have to push
the registration button for each client you want to add.
3 Browse to the SpeedTouch™ Wireless web page to see that the MAC address of
your wireless client is added to the Access Control List.
Note If a system password secures the SpeedTouch™ from unauthorized
access, you'll need to authenticate first before you can actually browse
its web pages.